Mechanible & Non Mechanible Electrodes
 
 GLOBALCAST - NM CASTOMET - FN
CASTOMET - M GLOBALCAST 1
CASTOMET - N  
 
     
  GLOBALCAST - NM
  Coding : AWS A/SFA 5.15 Est.
 
  Characteristics :  
 
GLOBALCAST-NM is a medium-coated type electrode for non-machinable welds on cast iron. The electrode should be preffered when a strong and rigid joint is to be obtained between two cast iron parts. Pre-heating is recommended for heavy and complicated section.
 
  Application :  
 
Welding of cast iron parts for all types of general reclamation or repair work, where machinability is not a primary consideration, joining cast iron to mild steel etc.
 
 
Sizes (mm) Current Range Amps Wt. 1000pcs/Kg. (Approx.) Pieces
Per Carton
Pieces
Per Case
4.00 x 350 140 - 180 43 60 720
3.15 x 350 90 - 140 28 90 1080
2.50 x 350 60 - 90
AC/DC (+)
19 135 1620
 
    Top
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
  CASTOMET - M
  Coding : AWS A/SFA 5.15 E NI CU B
 
  Characteristics :  
 
CASTOMET-M  is a versatile electrodes light graphite base coating with monel core wire for welding cast iron weld metal is monel (copper-nickel) ductile and easily machinable, electrodes can be operated on AC as well as DC (+) in all positions at lowest possible currents. The main characteristic of electrodes has least spatters, extremely soft arc and lowest dilution for joining casting. Mechanical properties are good enough even if preheating is not done except in case of heavy  section.
 
  Application :  
 
CASTOMET-M has wide application in joining and repair of broken castings removal of foundry defects by filling and correcting machinery errors with superior strength successfully weld of cast iron to steel without preheating and compositions is unknown.
 
 
Weld Metal % (Typical)
C Fe Ni Cu Hardness
0.75 2.5 66.0 28.0 170 BHN
 
  UTS : 350 N/mm2

 

 
 
 
Sizes (mm) Current Range Amps Wt. 1000pcs/Kg. (Approx.) Pieces
Per Carton
Wt. Per Carton
5.00 x 350 140 - 180 100 2 12
4.00 x 350 110 - 150 65 2 12
3.15 x 350 80 - 110 33 2 12
2.50 x 350 50 - 80
AC/DC (+)
19.5 2 12
 
    Top
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
  CASTOMET - N
  Coding: AWS A/SFA 5.15 E-Ni-Ci
 
  Characteristics :  
 
CASTOMET-N is light coated depositing pure nickel weld metal mechanible and resistance to corrosion. Ideally suited for cold welding of wrought and cast iron. The weld metal have excellent crack resistance and good creep strength. Electrodes easily work on AC or DC (+).
 
  Application :  
 
CASTOMET-N is specially formulated for repairs of broken castings joining of cast iron to steel and unknown composition of metal, machine base & frames cylinder blocks, correcting foundry defects non corrosive surfacing on cast iron part exposed etc.
 
 
Weld Metal % (Typical)
C Fe Ni Si S
0.82 2 95 1 0.025
 
  UTS : 420 N/mm2

Hardness : 165 BHN

 
 
 
Sizes (mm) Current Range Amps Wt. 1000pcs/Kg. (Approx.) Pieces
Per Carton
Wt. Per Carton
5.00 x 350 140 - 170 92 2 12
4.00 x 350 110 - 150 45 2 12
3.15 x 350 70 - 120 33 2 12
2.50 x 350 50 - 95
AC/DC (+)
19.8 2 12
 
    Top
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
  CASTOMET - FN
  Coding: AWS A/SFA 5.15 E-Ni-Fe-Ci
 
  Characteristics :  
 
CASTOMET-FN unique designed electrodes medium coated with Ferro-Nickel core wire for welding various type of cast Iron and joining to cast iron to steel Weld metal is strong ductile, soft and easily machinable.
 
  Application :  
 

CASTOMET-FN is best suitable for welding joining and repair of cast iron parts, reclamation of important cast job, including broken casting, joining steel to cast iron, engineering grade of cast iron subject to heavy wear without preheating.

 
 
Weld Metal % (Typical)
C Fe Ni Si Mn S
2.0 Bal. 55 1.0 1.0 0.025
 
 
 
Sizes (mm) Current Range Amps Wt. 1000pcs/Kg. (Approx.) Pieces
Per Carton
Wt. Per Carton
5.00 x 350 140 - 170 95 2 12
4.00 x 350 110 - 150 45 2 12
3.15 x 350 70 - 120 32 2 12
2.50 x 350 50 - 95
AC/DC (+)
20 2 12
 
    Top
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
  GLOBALCAST 1
 
  Characteristics :  
 
GLOBALCAST 1 is a versatile electrodes light graphite base coating with monel core wire for welding cast iron weld metal is monel (copper-nickel) ductile and easily machinable, electrodes can be operated on AC as well as DC(+) in all positions at lowest possible currents. The main characteristics of electrodes has least spatters, extremely soft arc and lowest dilution for joining castings. Mechanical properties are good enough even if preheating is not done except in case of heavy section.
 
  Application :  
 
GLOBALCAST 1 has wide applications in joining and repair of broken castings removal of foundry defects by filling and correcting machinery errors with superior strength successfully weld of cast iron to steel without preheating and composition is unknown.
 
 
Weld Metal % (Typical)
C Fe Ni Cu
1.0 Bal. 48-52 48-52
 
 
 
Sizes (mm) Current Range Amps Wt. 1000pcs/Kg. (Approx) Wt. Per
Carton
Wt. per Case
4.00×350 110-150 45 1 20
3.15×350 70-120 32 1 20
2.50×350 50-95
AC/DC (+)

20

1 20
 
    Top
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
 
     
 
Home | Profile | Products | Quility Policy | Exports | Inquiry | Contact us | Site Map Powered By : Bhardwaj Network.com